The Plastic Materials and Articles in Contact with Food (England) (Amendment) Regulations 2008
Made
23rd June 2008
Laid before Parliament
24th June 2008
Coming into force
for the purpose of regulation 4
30th June 2008
for all other purposes
1st July 2008
The Secretary of State makes
the following Regulations in exercise of the powers conferred
by sections 16(2), 17(1) and (2), 26(1)(a) and 48(1) of
the Food Safety Act 1990(1), and now vested in him(2).
In accordance with section
48(4A) of the Food Safety Act 1990 he has had regard to
relevant advice given by the Food Standards Agency.
As required by Article 9 of Regulation (EC) No. 178/2002 of the European Parliament and of the Council laying down the general principles and requirements of food law, establishing the European Food Safety Authority and laying down procedures in matters of food safety(3), there has been open and transparent public consultation during the preparation and evaluation of these Regulations.
The Plastic Materials and Articles in Contact with Food (England) Regulations 2008(4) are amended in accordance with regulations 3 to 5.
3-
For paragraph (3) of regulation 22 (other transitional
defences and savings) substitute the following —
“(3)
In any proceedings for an offence under these Regulations other than an offence referred to in regulation 21(1), it shall be a defence to prove —
(a)
in the case of lids containing a gasket that do not comply with the restrictions and specifications for Ref. No.’s 30340, 30401, 56800, 76815, 76866, 88640 or 93760 contained in the Annex to Commission Regulation (EC) No. 372/2007 laying down transitional migration limits for plasticisers in gaskets in lids intended to come into contact with foods(5), that the derogation contained in Article 1 of the Commission Regulation amending Commission Regulation (EC) No. 372/2007 laying down transitional migration limits for plasticisers in gaskets in lids intended to come into contact with foods(6) is applicable; or
(b)
in the case of lids containing a gasket that do not comply with the restrictions and specifications for Ref. No. 36640 (azodicarbonamide) contained in Annex III or in the case of plastic materials or articles which do not comply with the restrictions and specifications for phthalates under Ref. No.’s 74560, 74640, 74880, 75100 or 75105 contained in that Annex, that the act constituting the alleged offence was committed in relation to a plastic material or article which was manufactured or imported into the European Community before 1st July 2008; or
(c)
in any case other than those mentioned in sub-paragraph (a) or (b), that the act constituting the alleged offence was committed in relation to a plastic material or article which was manufactured or imported into the European Community before 1st May 2009; and
(d)
that the act constituting the alleged offence would not otherwise have constituted an offence under these Regulations if the amendments to the Directive made by Commission Directive 2007/19/EC had not been implemented in England at the time the matter occurred.”
Amendment to the Materials and Articles in Contact with Food (England) Regulations 2007
In paragraph (5) of regulation 11 (migration limits for regenerated cellulose film coated with plastics) of the Materials and Articles in Contact with Food (England) Regulations 2007(7), for the expression “as read with regulation 11” substitute “as read with regulation 13”.
In regulation 2 (interpretation) of the Plastic Materials and Articles in Contact with Food (Lid Gaskets) (England) Regulations 2007(8), for the definition of “the Commission Regulation” substitute the following definition —
“”the Commission Regulation” means Commission Regulation (EC) No 372/2007 laying down transitional migration limits for plasticisers in gaskets in lids intended to come into contact with foods as amended by the Commission Regulation amending Commission Regulation (EC) No. 372/2007 laying down transitional migration limits for plasticisers in gaskets in lids intended to come into contact with foods(9);”.
Signed by authority of the Secretary of State for Health.
23rd June 2008
Dawn Primarolo
Minister of State
Department of Health
These Regulations provide for the execution and enforcement in England of the Commission Regulation amending Commission Regulation (EC) No. 372/2007 laying down transitional migration limits for plasticisers in gaskets in lids intended to come into contact with foods, (“the new Commission Regulation”). The new Commission Regulation extends the relevant deadline for such materials and articles to 30th April 2009. It had not been published in the Official Journal at the time this instrument was made, but was adopted on 20th May 2008 under the document reference SANCO/2008/01414-00-00.
2.
These Regulations provide for the execution and enforcement of the new Commission Regulation by amending regulation 22(3)(a) of the Plastic Materials and Articles in Contact with Food (England) Regulations 2008 (“the principal Regulations”) (regulation 3), and omitting regulation 29(c) of those Regulations (regulation 4).
3.
These Regulations also correct two errors in the principal Regulations (regulations 3 and 5), and make a consequential amendment (regulation 6).
4.
A full impact assessment has not been prepared for these Regulations because no impact on the private or voluntary sectors is foreseen.
